Views:11 Author:Site Editor Publish Time: 2019-02-18 Origin:Site
When carrying the island freezer, the foot should be lifted, the door handle should not be grasped or exerted on the table top and the condenser, and it should not be dragged on the ground.
The maximum inclination angle of the island freezer cabinet should not exceed 45 degrees, and it should not be inverted or horizontally placed. Otherwise, the compressor will be damaged or the refrigeration oil in the compressor will flow into the refrigeration pipeline, which will affect the refrigeration and cause the compressor to spring.
During the transportation process, it is necessary to prevent the island freezer from colliding and violently shaking, and to prevent rain and water from immersing. After determining the placement position, it should be placed for at least 4 hours and then tested.
The island freezer should be placed away from the heat source, away from direct sunlight and well ventilated. Because it needs to exchange heat with the outside world, it can dissipate heat to the outside through the condenser. The higher the ambient temperature, the slower the heat dissipation will make electricity. The longer the working hours of the refrigerator and the freezer, the more power consumption and the poor cooling effect. If the island freezer is not ventilated, the freezer is full of debris, or the wall is too close, which is not conducive to heat dissipation will affect the cooling effect. The top surface of the freezer should have a space of at least 30CM, and at least 10cm of space should be left on the back and sides to facilitate heat dissipation.